Protecting The surface Scratch and impact Protection
Dont't place lighted cigarettes directly on laminate surface. Knives or other sharp Utensils may since or scratch the surface. Don't chop, slice, pound or hammer on any laminate surface.
In most cases, Only need to use a clean, damp, non abrasive cotton cloth and mild liquid detergent or household cleaner and riser with clean water. Don"t flood the laminate since water can be absorbed and results substrate to swell. Dry the surface with a soft, clean and non abrasive cotton cloth.
Never use cleaners containing acid, alkali or sodium hypochlorite. These cleaners will mar, etch, corrode and Permanently discolour the laminate surface. Also make sure that bottles, rags and other materials contaminated with these cleaners never come in contact with the laminate surface.
Direction of use
Before using laminate please ensure that the surface of plywood and laminate are clean, dry and free of other contaminations.
Please well stir adhesive before use and don't and water in it. Also ensure that applied adhesive is sufficient or not?.
Once laminate pasted on plywood surface dont't forget to apply adequate pressure for perfect Bonding. To remove air bubble from assembly use roller Press from centre of assembly towards edge of assembly..
A gap of minimum 2 mm should be maintained between two laminates while pasting side by side..